PureScape-CE is a water based fluoropolymer dispersion which protects and enhances the colour of natural stone and porous building substrates.
PureScape-CE protects against:
- Water and moisture penetration
- Efflorescence salt – deterioration
- Fuel and Oil spillages
- Food and drink spills
- Mild Acids and Alkali cleaners
- Pollution & dirt contamination
- Vegetation, Algae, Lichen & Moss growth.
Completely invisible once dry, does not form a coat. Allows the treated surface to remain moisture vapor permeable. UV-resistant.
Non-hazardous and non-toxic water borne, solvent and silicone-free, fully biodegradable.
Application:
- Apply on a clean surface free from dust, dirt, oil, efflorescence, organic growth and old paint films.
- Fill in and repair cracks or gaps prior application.
- Ready t use. No need for dilution.
- Apply using a low pressure spray, brush or roller.
- Ensure application is from bottom to top on vertical surfaces taking care not to let the product run. Any subsequent coats must be applied “wet on wet” within 10 minutes of previous application.
- Do not allow the applied product to dry between applications.
- All surfaces must be treated to saturation in 1-3 applications “wet on wet” applied, to ensure 100% product efficiency.
- Clean equipment with clean warm water.
- Apply on a porous surface. PureScape-CE will not perform correctly if applied over non-absorbent surfaces.
Coverage:
Architectural Concrete: 5 Sqm/Ltr
Block Paving: 5-8 Sqm/Ltr
Natural Stone: 2-5 Sqm/Ltr
Granite: 8 – 16 Sqm/Ltr
