PureScape® porous landscape protection. All-in-one colorless protection for concrete & stone ground surfaces.
PureScape® is a water based hydrophobic impregnation which protects concrete and stone substrates. It is ground surface durable and can also be applied to building facades.
After application a treated surface is protected against:
- Water and moisture penetration
- De-icing salt deterioration
- Fuel and Oil spillages
- Food and drink spills
- Mild acids and Alkali cleaners
- Pollution & dirt contamination
- Bird fouling
- Vegetation, Algae, Lichen & Moss growth
- Efflorescence
- Does not affect slip resistance
A PureScape® treated surface will remain moisture vapor permeable without chemically altering the substrate.
Completely invisible once dry, does not form a coat. Allows the treated surface to remain moisture vapor permeable. UV-resistant. Low pleasant odor.
Non-hazardous and non-toxic water borne, solvent and silicone-free, fully biodegradable.
Tint-able upon request in all RAL color shades. This option is ideal for correcting concrete colour mismatches or enriching a surface.
Application:
- Apply on a clean surface free from dust, dirt, oil, efflorescence, organic growth and old paint films.
- Fill in and repair cracks or gaps prior application.
- Ready to be used. No need for dilution.
- Apply using a low pressure spray, brush or roller. Ensure application is from bottom to top on vertical surfaces taking care not to let the product run.
- Any subsequent coats must be applied “wet on wet” within 10 minutes of previous application.
- Do not allow the applied product to dry between applications.
- All surfaces must be treated to saturation in 1-3 applications “wet on wet” applied, to ensure 100% product efficiency.
- Clean equipment with clean warm water.
- Avoid contact with water for 6 hours. Water repellence is evident after initial curing but may take up to 7 days to reach 100% efficiency.
- Apply on a porous surface. PureScape-CE will not perform correctly if applied over non-absorbent surfaces.
Coverage:
Architectural Concrete: 5 SqM/Ltr
Block Paving: 5-8 SqM/Ltr
Natural Stone: 2-5 SqM/Ltr
Granite: 8 – 16 SqM/Ltr
