Finish-Up™ Polyurethane can be applied over repairs such as Burn-Ins, Fil-Stik® Putty Stick fills, Blendal® Powders and Touch Up Markers to seal in the repair, leaving a durable protective finish. Can be applied over properly cleaned existing finishes to improve appearance and durability. Finish-Up™ Polyurethane adheres well to most types of lacquers, vinyl clads, high pressure laminates as well as many other substrates. Best of all, it is water based and has almost no odor. This feature makes Finish-Up™ Polyurethane the product of choice where aerosols and other solvent based touch up finishes are not appropriate. A user friendly wipe on finish.
Advantages:
- Easy wipe on application
- Quick drying
- Good flow characteristics
- Good durability
- Moisture & alcohol resistant
- Water clear
- Excellent adhesion
- Low V0C
- Will not lift other finishes
- Nonflammable
Directions:
Shake well before use. Appy on a clean, dry and wax free surface. Sand the surface lightly and apply Finish-Up by a soft cloth or pre-dampened cellulose sponge. For small area touch-up, apply Finish-Up to the applicator material. Wipe damaged area in the direction of grain in three to four passes using a padding like motion. For larger area application, wet applicator generously and wipe with the grain. Repeated wiping will lead to a dulling effect. Recoat, if needed after one hour. Allow overnight drying. Clean up with warm tap water.
