Two-component water-soluble epoxy paint suitable for the protection of concrete floors and metal surfaces for indoor use. Suitable for painting concrete floors of factories, shops, warehouses, workshops, car parks, workshops and generally surfaces subject to intense mechanical and chemical strain. Low VOC.
Advantages:
- Anti-slip properties & excellent resistance to chemical cleaners
- Great hardness & strong adhesion
- Great coverage and ease of application
- High resistance to chemical & mechanical strain
- Extremely enhanced mechanical properties, greater elasticity & durability
- Available in two ready-made shades: RAL 7035 & RAL 7040
- Low VOC
Application:
Apply on a clean surface free of dust, grease, oil, peeling old paint, loose pieces, etc. It is recommended to apply primer on surfaces of reduced strength, Epoxy Hydro 2K Primer.
Before mixing, stir component A mechanically at low speeds. Add component B to component A, dilute 10-15% with water and stir until completely homogenized for 2-3 minutes. The mixing process should be done at the bottom of the package, scraping the sides and bottom of the container to ensure complete mixing. Overmixing should be avoided to minimize air entrapment. Only mix whole packages. After 5-10 minutes immediately apply a layer of Epoxy Hydro 2K by brush or roller. Once dry, apply the second layer crosswise.
Drying time: 1-2 hours
Recoating time: 24 hours
Coverage: 10-12 (m²/Lt)
