Montosport Piscinas Poseidon Plus is a satin paint for swimming pools, 100% chlorinated rubber, highly resistant to chemical agents, alkalinity and moisture. With an anti-mould and anti-algae effect. Protects against algae and mold. Excellent adhesion and fast drying (20 min). Works well with mortar, cement and metal.
Properties:
- Surface levelling
- Waterproof
- Anti-fungus
- Water-resistant
- Chemical resistant
- Fast drying
- Excellent adhesion
- Color Blue
How to Use:
- Apply on a clean and dry surface. Free from alkaline, fungus, rust and grease. In case there is fungus treat it with Montolimp.
- Ensure the surface is properly levelled and there are no cracks.
- Sand down the surface and ensure there is proper adhesion between the substrate and previous coats. If the adhesion between coats is greater than the adhesion of the old paint to the base this can cause chipping and cracking of the paint.
- If you treat the surface with hydrochloric acid to open the pore, clean with plenty of water and allow it to dry.
- Apply by rush, roller or gun.
- Apply the first coat diluted by 30% with solvent. Allow it to dry and recoat one more time with same dilution level.
- Apply the final coat diluted 5-15% with solvent.
- It is recommended not to apply over water-based swimming pool paint.
- Minimum recommended time for filling the pool 3 days.
- This product is resistant to chlorine and chlorine derivatives if concentration is within the limits indicated in RD 742/2013.
Drying time: 10min
Recoating time: 24 hours
Coverage: 6-8 m²/Lt
Fill in with water: min 3 days
