A dye type stain that promises superior transparent qualities found only in dye stains and excellent fade resistance. Will not bleed into top coat finishes. May be brushed, wiped or sprayed directly on wood or mixed in lacquer for toning. Colors may be intermixed to acquire additional shades. Mohawk’s Ultra® Penetrating NGR Stain offers the user the best-combined characteristics of water, alcohol, or lacquer type dyes. Custom match colors are also available with a minimum order of 5 gallons. Ultra® Penetrating NGR Stain Reducer and Ultra® Penetrating NGR Stain Retarder are available.
Advantages:
- Low VOC
- Enhances the natural beauty of wood grain
- Colors can be intermixed to achieve other shades
- Excellent UV resistance
- Fade resistant colors (not intended for exterior applications)
- Non-bleeding when topcoated with most solvent-borne topcoats
- Stain clean up may be done with water
- Color intensity may be adjusted with M520-0001 Ultra Penetrating Stain Reducer.
- Open time of stain can be increased by addition of M520-0002 Ultra Penetrating Stain
Retarder.
Directions:
Apply on a clean, dry and oil and dust free surface. Sand lightly with 280 grit. Ultra Penetrating Stain may be brushed, wiped or spray applied. Stain should be applied with
the grain in a wet uniform consistency.
Allow the stain to penetrate, then wipe off excess stain with a lint free cloth. Ultra Penetrating Stain is recommended for use without reduction, however it may be reduced with Ultra Penetrating Stain Reducer (M520-00017) to adjust color strength. Allow the stain to thoroughly dry before topcoating.
Drying time may be slowed with Ultra Penetrating Stain Retarder (M520-00026).
Ultra Penetrating Stain may also be added to nitrocellulose lacquers for shading. Clean up with water or Ultra Penetrating Stain Reducer.
