MS-Hybrid Polymer liquid moisture-proofing system.
Self-levelling construction seal for horizontal and vertical surfaces. Does not contain tin, phthalate, solvent, isocyanate and bitumen. Based on silane modified polymers.
Suitable for direct contact with bitumen.
- Ready-to-use, One-Component
- Long Processing time
- Wide adhesion range
- Direct contact with bituminous substrate
- Permanently elastic
- Excellent sealing properties
- High durability and weather resistance
- Non-corrosive on surfaces
- Chemical neutral polymerization
- Very low emission
- Free of tin, phthalate, solvents, isocyanates and bitumen
Application:
Apply on a clean and dry surface free of dust, grease, loose parts and old adhesives.
Old coatings must be removed in advance.
The substrate must be in a structurally sound.
Good adhesion can be achieved without a primer on most surfaces.
However, if the product is exposed to large temperature fluctuations, if it comes in contact with water or in case of a non-absorbent substrate, it is recommended to apply primer.
Gomastit Aqua Protect flex liquid is ready to use.
Apply evenly the first coat by roller or brush.
Allow it to dry and recoat.
Drying time: 6 hours (+20°C / 50% humidity, thickness of 1 mm)
